On 2010-02-26 Rupert, Rochester, NY wrote: I am doing an office cabinet project and was planning on using biscuits, glue and screws to assemble the cases of the cabinets. Several people that I talked to about the project said you have to use the Kreg Jig for pocket screw joints. I hesitated at first and finally decided to give it a try. WOW, am I glad I did. I have never used a tool that has performed as well as this jig does. It makes a strong square joint and has cut my assembly time down to minutes rather than hours. No more waiting for glue joints to dry. No more clamping and gluing and waiting for things to dry overnight. I am thrilled with this tool. It is making a very large project go very smoothly and I am truly enjoying it more with this jig. I would highly recommend this jig to everyone that does woodworking . And summed up by saying Fantastic tool. Currently Kreg K3MS K3 Master Pocket Hole Jig System has an overall rating of 10 over 10.
Kreg K3MS K3 Master Pocket Hole Jig System can also be found in the following searches:
Kreg claimed Includes: Drill Guide Block, Benchtop base, Portable base, Premium face clamp, Material support stop, Dust collection shroud, Drill bit, Depth collar, Allen wrench, Driver bits, Sample screws, Carrying case. The Kreg Pocket Hole Jig Master System - K3MS is the ultimate pocket-screw Kit on the market and a great choice for any woodworking enthusiast. Whether you´re building your very first pocket-screw project, or you´re in your woodshop twelve hours a day, the Master System is everything for everybody. The K3 Pocket Hole Jig Master System works as both a benchtop and a portable tool. The drill guide block can be quickly removed from the benchtop base and placed in the protable base for use in the workshop or on the job site. The portable base is deisnged to work with the dual purpose Premium Face Clamp that both clamps the workpiece to the base while drilling and can then be used for assembly. In addition, the portable base can be screwed down to a board and used in a vertical position, much like the benchtop base. Unlimited Material Thickness: Because the drill block guide slides and locks in 1/8´ increments in both the benchtop and portable bases, centering a screw in material from 1/2´ - 1-1/2´ thick takes just seconds. Simple loosen the pin, slide the drill guide block to the desired setting, and drill away! Material Support Stop: Adjust it to the edge of the board to precisely repeat Pocket Hole positions for quick production drilling. When you don´t need it or you´re drilling panels, the hinged stop simple swings out of the way. Front Side Clamping: A K3 exclusive, the handle for the clamp is on the same side as your drill, so you no longer need to reach around the workpiece to set your clamp. You´ll save time and - even more important - you´ll save your back.
Item that are similar to Kreg K3MS K3 Master Pocket Hole Jig System can be found at: